VMware 5V0-41.20

Certification exams change, and outdated study material can quietly sabotage your score. Dumpkiller keeps its 5V0-41.20 practice questions aligned with the current VMware SD-WAN Troubleshoot exam, with free updates for 365 days through 2026 and beyond.

VMware 5V0-41.20 Exam Overview:

VMware 5V0-41.20 Exam Syllabus Topics:

VMware SD-WAN Troubleshoot: Common Questions From Candidates

What is the VMware SD-WAN Troubleshoot certification exam?

The VMware SD-WAN Troubleshoot exam (code: 5V0-41.20) is the official VMware exam that leads to the VMware SD-WAN Troubleshoot 2022 certification. It sits at the Specialist / Intermediate level of the VMware certification track. It is also connected with related credentials such as VMware SD-WAN Design and Deploy 2022, VMware SD-WAN Operation and Administration 2022. Passing it proves to employers that your skills have been validated by VMware itself, which is why the 5V0-41.20 credential keeps showing up in job postings.

How many questions are in the 5V0-41.20 exam, and how long does it take?

The VMware SD-WAN Troubleshoot exam gives you 90 minutes to work through 36. Pacing matters more than most candidates expect, so before exam day, run at least one full timed session in the Dumpkiller test engine to learn how long you can afford per question. If an item stalls you, flag it and move on — coming back later beats burning five minutes on a single question.

What score do I need to pass the 5V0-41.20 exam, and how much does it cost?

The passing score for the VMware SD-WAN Troubleshoot exam is 300 (scaled 100–500), and the official registration fee is $250 USD. Remember that a failed attempt means paying that fee in full again, so a timed self-assessment with Dumpkiller practice questions about a week before your exam date is a cheap way to confirm you are scoring comfortably above 300 (scaled 100–500).

Are there any prerequisites for the 5V0-41.20 exam?

According to VMware, the following applies: No mandatory prerequisites; recommended 6–12 months hands-on experience with VMware SD-WAN/VeloCloud. Certification policies do change from time to time, so confirm the latest requirements on the official exam page at https://www.broadcom.com/support/education/vmware/certification before you register.

How do I register for the 5V0-41.20 exam?

You can book your VMware SD-WAN Troubleshoot exam through the official channels below:

• VMware Certification Portal
• Pearson VUE Registration

Depending on availability in your region, the exam is delivered as Online proctored or Onsite at Pearson VUE test centers.

What official training does VMware recommend for the 5V0-41.20 exam?

VMware lists the following training options for VMware SD-WAN Troubleshoot candidates:

• VMware SD-WAN for Service Providers [V4.x]

Official courses build a solid foundation, and pairing them with the 37 practice questions from Dumpkiller shows you how ready you really are before you spend money on the exam itself.

Can I try the 5V0-41.20 practice questions before buying?

Yes. Dumpkiller offers a free 5V0-41.20 PDF demo so you can review the question style, difficulty, and explanations before committing to anything. After purchase, your VMware SD-WAN Troubleshoot material includes 365 days of free updates, and if your product expires after that, you can extend the update service at a 50% discount from your member zone.

What happens if I do not pass the 5V0-41.20 exam, and how is my order delivered?

If you take the corresponding 5V0-41.20 exam within 60 days of your purchase and do not pass, you can apply for a full refund under our 100% Money Back Guarantee, subject to a few conditions: the failed exam must be the one matching your purchase; sitting the exam within 3 days of purchase does not qualify, since that leaves too little preparation time; downloading the material without actually taking the exam does not qualify; free materials and expired orders are excluded; and the candidate name must match the payer name. To apply, send a scanned copy of your enrollment slip together with your official Score Report (PDF) within 2 days after the exam, and claims are processed within 7 days. If you would rather not take a refund, you can exchange your purchase for two free products of equal value while keeping the update service on the product you originally bought. As for delivery, everything is an instant download: your products are sent to your email within one minute of payment — contact customer service if nothing arrives within 2 hours — and there is no limit on the number of computers you can install the software on.

What topics are covered in the 5V0-41.20 exam?

The official VMware SD-WAN Troubleshoot syllabus is organized into 6 main domains. The first three are Troubleshoot Routing & DMPO (20%), Diagnostic Tools & Licensing (15%), and Troubleshoot Connectivity & Tunnel Issues (20%). For the full domain-by-domain breakdown, see the complete Exam Topics outline above.

VMware SD-WAN Troubleshoot Sample Questions:

Question #1
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY hub location.
The Checkpoint VNF and associated security services were successfully deployed at the London Branch. Users are now are complaining that Webpages are extremely slow to load, just like before.
What should the administrator do?

A. Check the flow records in Remote Diagnostics.
B. Disable and redeploy the VNF with lower memory requirements.
C. Reboot the Edge, as this is a requirement in the deployment of a Security VNF.
D. Verify to see if a firewall rule in the Edge is set to allow traffic to the Checkpoint VNF.

Question #2
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network engineer is configuring an Internet Backhaul Policy for the Chicago Branch to utilize NY's hub as a much better source for Internet for certain SaaS applications. For an unknown reason, the network engineer is not able to select the hubs in the Internet Backhaul Policy.
What could be the reason?

A. The Edge's profile does not include Backhaul hubs as an option.
B. The Dynamic Branch to Branch has not been enabled.
C. The hub is not configured with the proper IP address.
D. Dynamic Branch to Branch using gateways has not been enabled.

Question #3
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

The network administrator has been made aware that Chicago is receiving traffic from non-SD-WAN sites, bottlenecking Chicago's interfaces. The network administrator's VMware SE has mentioned using the uplink feature to help resolve this.
What are two ways the uplink feature should be used in this scenario? (Choose two.)

A. Direct all traffic to that neighbor designated as an uplink,
B. Stop mutual redistribution of routes from underlay and overlay.
C. Prevent the site in question from becoming a transit site.
D. Set the uplink community to forward traffic to a group of neighbors.

Question #4
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network administrator wants to achieve better high-availability and network reconvergence between LAN-side BGP Networks and the hub Edges in New York.
What must the administrator do?

A. Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Keep Alive timer is 3 times more than the Hold timer.
B. Nothing, the system will auto-rebalance connections and will provide sub-second convergence.
C. Modify the Keep Alive and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Keep Alive timer.
D. Modify the Connect and Hold timers to the lowest possible values ensuring the Hold timer is 3 times more than the Connect timer.

Solutions: